In this post I will explain how to disassemble Motorola E1000 for cleaning or other purposes.

I decided to disassemble the phone because I bought from a guy from UK via Ebay and it was extremely dirty inside, looks like he wasn't caring about his phone at all! What a dumb guy :)

So here we are, step by step with instructions:

Motorola E1000 before procedure!

Here is TP for A835 -
TP1300 and TP1301 from the schematic.

General view

There is one BUT - there is any conform unlock using this way, maybe you can try ?

This article will describe aspect of flashing Motorola P2k Phones under windows using Motorola PST software. This way will work for the following phones: v300 V500 V600 V550 V80 E398... you just need to use appropriate Flash/Flex files.

If you want to switch your Motorola A1000 into a flash mode, do following:

- turn it off
- remove SIM card, tFlash (trans flash) and battery
- press and hold 2 game buttons (with single and double cirlcles)
- plug in charger cable (charger is powered on)
- slowly release game buttons (.... butloader should appear)
- put battery back (important to have battery fully charger before flashing!)
- disconnect charger to be able connect USB data cable.
- proceed with flashing.