Bluetooth controlled Bescor MP-101 Pan Tilt Head modification

Bescor MP-101 Pan and Tilt head was very useful addition to my photography equipment which allow me to photograph things remotely, but it had one big limitation, well 20ft limitation – extension cord, yes exactly it was remotely controlled with 20ft or upgradable
Read More

3D Printable enclosure for SensorTag2 WatchDev pack.

Want to build smart watch? I will show you how. Created 3D Printable enclosure for SensorTag2 WatchDev pack, original silicone pocket was kinda looking lame 🙂 3D Files available here – http://www.thingiverse.com/thing:951915 You tube video with
Read More

3 New DevPacks for CC2650 SensorTag 2 from TI

There are more exiting things you can do now with CC2650 SensorTag 2 Recently TI have introduced 3 new DevPacks you can purchase to make more interesting projects with SensorTag 2 SensorTag 2 is CC2650 based DevPack boasting 10 sensors, low power MCU and 3 Different connectivity
Read More

TI SensorTag 2 Power consumption analysys

How long you think SensorTag 2 will last on single 3V coin battery? During my first SensorTag2 review  video I had issue with that no all sensors were working properly, I was wondering if I got defective unit, turned out that battery which SensorTag 2 was shipped with
Read More

New SensorTag 2 from TI, description and close up photos.

New SensorTag 2 from TI is really great Bluetooth 4LE Devkit boasting  10 Sensors and low power MCU Today I got new toy from TI, it is CC2650STK SensorTag2 DevKit from Texas Instrument. I was looking long for a device whcih is BLE4 powered and has sensors on it, I
Read More

Mean Well power supply mod for RigidBot Big 3dPrinter

Project: Mean Well power supply mod for RigidBot Big 3dPrinter, 24V / 18A capable In this project I decided to replace original RigidBit Bot power subbly, AKA “RigidBrick” with Mean Well SE-450-24 power supply. RigidBrick is notorious for failing in very wrong
Read More

Truth about Using Aluminum Body for Thermistor

There is truth about Using Aluminum body for Thermistor, after a week of successful run with my newly made Hex Thermistor for my RigidBot 3D Printer (Here is the article how to make one – http://mobilemodding.info/2014/12/diy-hex-thermistor-3d-printers/), I faced the
Read More

DIY cheap PTFE hotend tube for 3D printer

This DIY PTFE hotend tube will be most of all useful for RigidBot / RigidBotBig extruders, but also will be useful for J-head hotend, Delta Rostock extruder and may be some others but this all I know. The idea is to use 2 PTFE tubes one inside another, first is ID 2mm
Read More

DIY Hex Thermistor for 3D printers

For this DIY how to make hex thermistor for 3D printers you need: Hex spacer, any you can find (Do not use aluminum it might get fused with hot end, yes I my older version of this article I use to say aluminum but got problem with it recently) Thermo-resistor NTC type 100K
Read More

Western Digital My Book Essentials 3TB USB 3.0 speed test

In this article I will do Benchmark of Western Digital My Book Essentials 3TB on USB 3.0 interface. Finally I got the USB 3.0 controller. This is StarTech PEXUSB3S2E2I 2 External 2 internal USB 3.0 ports with SATA power, you can see official specs here –
Read More